Wholesale 90° 3 Flute Carbide Center Chamfer End Mill Suppliers, Factories
Product Description
Item code |
Angle Degree |
Shank Dia (mm) |
Total Length (mm) |
ECHP3F-D3.0-R60 |
60° |
3 |
50 |
ECHP3F-D3.0-R90 |
90° |
3 |
50 |
ECHP3F-D3.0-R120 |
120° |
3 |
50 |
ECHP3F-D4.0-R60 |
60° |
4 |
50 |
ECHP3F-D4.0-R90 |
90° |
4 |
50 |
ECHP3F-D4.0-R120 |
120° |
4 |
50 |
ECHP3F-D5.0-R60 |
60° |
5 |
50 |
ECHP3F-D5.0-R90 |
90° |
5 |
50 |
ECHP3F-D5.0-R120 |
120° |
5 |
50 |
ECHP3F-D6.0-R60 |
60° |
6 |
50 |
ECHP3F-D6.0-R90 |
90° |
6 |
50 |
ECHP3F-D6.0-R120 |
120° |
6 |
50 |
ECHP3F-D8.0-R60 |
60° |
8 |
60 |
ECHP3F-D8.0-R90 |
90° |
8 |
60 |
ECHP3F-D8.0-R120 |
120° |
8 |
60 |
ECHP3F-D10.0-R60 |
60° |
10 |
75 |
ECHP3F-D10.0-R90 |
90° |
10 |
75 |
ECHP3F-D10.0-R120 |
120° |
10 |
75 |
ECHP3F-D12.0-R60 |
60° |
12 |
75 |
ECHP3F-D12.0-R90 |
90° |
12 |
75 |
ECHP3F-D12.0-R120 |
120° |
12 |
75 |
Other sizes could be made as per customers’requirement.
Mold & Die Industry: Precision chamfering/deburring of mold cavities, injection mold edges, and die-casting mold corners to improve workpiece strength and assembly fit.
Automotive & Mechanical Parts: Chamfering of engine components, gear teeth, gearbox housings, and structural parts for stress relief and smooth assembly.
3C & Consumer Electronics: Profiling of aluminum phone frames, laptop shells, and precision components for cosmetic finish and edge protection.
General Engineering: Chamfering of shafts, flanges, brackets, and cast iron/carbon steel parts to remove sharp edges and burrs.
Medical Device Manufacturing: Finishing of titanium alloy implants and surgical instruments with strict precision and surface finish requirements.
High-Efficiency Chamfering: 3-flute design enables fast edge profiling and burr removal.
Light Interrupted Cutting: Force dispersion ensures stable performance in intermittent chamfering operations.
Precision Profiling: Consistent chamfer angles for high-precision applications.
Higher Cutting Efficiency: 3-flute geometry maximizes material removal rate for fast chamfering.
Force Dispersion: Evenly distributes cutting force across edges, reducing single-edge load and minimizing chipping/wear.
Longer Tool Life: Reduced edge stress extends overall tool service life.
Uniform Chamfer Quality: Precision-ground edges ensure consistent chamfer angles and surface finish.
100% Original Carbide Rods: Uses APEX/GESAC or imported Sandvik ultra-fine grain carbide for high hardness and toughness.
Advanced Equipment: Small tools processed on Rollomatic; standard tools on Walter/Anka for tight tolerances and consistent edge quality.
ISO9001:2015 Certified: Strict quality control from raw material to finished product.
20 Years of Expertise: Full industrial chain from tungsten raw blanks to precision tools, ensuring stable supply and cost control.
Flexible Supply: MOQ=1pc, samples available, 7–25 days delivery, 1,000,000 pcs/month capacity.
Customization Support: Customizable chamfer angles, diameters, lengths, and shank types.
A: Designed for workpiece edge chamfering & deburring in molds, automotive parts, 3C products, and general machinery. For materials up to HRC50.
A: Higher cutting efficiency, force dispersion, reduced edge wear, longer tool life, and uniform chamfer quality.
A: For general use only (HRC ≤50). For HRC55+ ultra-hard materials, use our HRC68 series tools.
A: MOQ=1pc, samples available. Standard: 7–25 days; custom: 15–25 days. Supply capacity: 1,000,000 pcs/month.
A: Yes. Custom chamfer angle, flute count, diameter, total length, and shank type are supported.
A: Use high-pressure coolant, optimize cutting parameters, avoid overloading, and ensure smooth chip evacuation.
