Wholesale Tungsten Carbide End Mills for Alumius with Multi-Colored Coating Manufacturer, Suppliers
Product Description
| Item Code | Cutting Dia (mm) | Shank Dia (mm) | Flute Length (mm) | Overall Length (mm) |
|---|---|---|---|---|
| APAL3E-D1.0-H4 | 1.0 | 4 | 3 | 50 |
| APAL3E-D1.5-H4 | 1.5 | 4 | 4 | 50 |
| APAL3E-D2.0-H4 | 2.0 | 4 | 6 | 50 |
| APAL3E-D2.5-H4 | 2.5 | 4 | 7 | 50 |
| APAL3E-D3.0-H4 | 3.0 | 4 | 9 | 50 |
| APAL3E-D4.0-H4 | 4.0 | 4 | 12 | 50 |
| APAL3E-D5.0 | 5.0 | 6 | 15 | 50 |
| APAL3E-D6.0 | 6.0 | 6 | 18 | 50 |
| APAL3E-D8.0 | 8.0 | 8 | 20 | 60 |
| APAL3E-D10.0 | 10.0 | 10 | 30 | 75 |
| APAL3E-D12.0 | 12.0 | 12 | 35 | 75 |
| APAL3E-D16.0 | 16.0 | 16 | 45 | 100 |
| APAL3E-D20.0 | 20.0 | 20 | 45 | 100 |
Other sizes could be made as per customers’ requirement.
Aluminum & Aluminum Alloys
High-speed machining of cast aluminum, 6061/7075 aerospace aluminum, and extruded aluminum for heat sinks, electronic casings, and automotive lightweight components.
Copper & Brass
Precision milling of electrical connectors, decorative hardware, and heat exchanger parts requiring smooth surface finishes.
Non-Ferrous Metals & Plastics
Machining of zinc, lead, acrylic, PVC, and ABS for consumer electronics and precision instrument parts.
3C & Consumer Electronics
CNC profiling of aluminum phone frames, laptop shells, and LED heat sinks with strict cosmetic finish requirements.
Automotive & Aerospace
Lightweight structural components (engine brackets, chassis parts) needing high material removal rates and clean cuts.
High-Speed Machining (HSM)
Optimized for high spindle speeds and feed rates to maximize productivity in aluminum machining.
Semi-Finishing & Finishing
Delivers ultra-smooth surface quality (Ra ≤ 0.2μm) without post-processing, ideal for visible components.
Deep Cavity & Slotting
Stable chip evacuation prevents clogging in deep pockets and narrow slots, reducing tool wear and breakage.
High-Hard Aluminum Alloys
Suitable for high-hardness aluminum alloys (HRC 55–68) due to the multi-colored coating’s wear resistance.
1. Aluminum-Optimized Design
- Multi-Colored Coating: Specially formulated for high-hard aluminum (HRC 55–68). Offers excellent wear resistance, low friction, and anti-adhesion properties, reducing built-up edge (BUE) and extending tool life by 35%+.
- Balanced Flute Geometry: 3-flute design balances chip evacuation and cutting stability, tailored for soft, sticky non-ferrous metals.
- High Material Removal Rate: Enables faster feeds and speeds compared to standard end mills, boosting production efficiency.
2. Premium Material & Manufacturing
- 100% Original Carbide Rods: Uses APEX/GESAC domestic high-quality rods or imported Sandvik rods, with ultra-fine grain structure for enhanced rigidity and toughness.
- Advanced Processing Equipment: Small-end mills (D1.0~6.0mm) processed on Rollomatic; standard-size mills on Walter/Anka machines, ensuring tight tolerances and consistent edge quality.
- ISO9001:2015 Certified: Strict quality control from raw material to finished product, with full-staff quality responsibility system.
3. Industrial Chain & R&D Strength
- 20 Years of Production Experience: Full industrial chain from tungsten raw blanks to precision tools, ensuring stable supply and cost control.
- Provincial-Level Technology Center: 112 senior/master’s degree+ technical personnel, with professional testing labs for material performance and tool parameters.
4. Flexible Service & Supply
- MOQ 1pc & Sample Available: Supports small-batch trials and prototype production.
- Customization Support: Customizable diameters, lengths, flute counts, and shank features to meet specific application needs.
It is designed for aluminum and aluminum alloys (HRC 55–68), copper, brass, and non-ferrous metals. It is not suitable for ferrous metals like steel or cast iron.
The multi-colored coating provides high wear resistance, low friction, and anti-adhesion properties. It effectively reduces built-up edge (BUE) and extends tool life by over 35% on high-hardness aluminum.
No. For steel applications, please use coated steel-specific end mills instead.
The MOQ is 1 piece, and samples are available. Standard specifications take 7–15 days, while custom items require 15–25 days.
Yes. Customizations for diameter, overall length, flute length, and shank configuration are supported based on your requirements.
Use high-lubricity coolant or air cooling, optimize cutting parameters, and ensure smooth chip evacuation to effectively manage cutting heat.
